2" / 50mm Suzuki Jimny Black Raptor Suspension Lift Kit

The springs are made here in the UK and have the complete range of heat treatment processes, hardening, quenching and tempering, are all digitally controlled to ensure the correct hardness is achieved. Full shot peening, pre-setting and load testing ensure a long and fatigue free life.

The springs are nice and flexy and not stiff, and are slightly uprated to cope with the extra height and extra weight drivers can carry on offroading trips

The kits come with specific  LHD and RHD springs and also LHD Diesel springs

This kit comes with Black Raptor shocks. These gas charged shocks are matched specifically for the Jimny to give the best ride possible.

These shocks are not as stiff as other aftermarket shocks such as Pro Comp or Rough Country.

The Black Raptor shock absorbers are designed with an integrated dust cover to eliminate the risk of any dust or debris damaging the shock, this also eliminates the need to buy boots/gators to protect your shock absorbers.

A Black Raptor decal pack is also included in the kit free of charge

The kit above is the minimum you need to lift your jimny and drive away but here are some of the main

“Frequently asked questions”

1.Do i need to fit extended brake hoses?

        No if you are keeping the front Anti roll bar / sway bar, 

        Yes if you plan to remove it for more articulation and better offroad ability

2.Do i need to fit castor correction bushes?

No you don’t need to from a safety / inspection point of view but i always recommend them as they bring the front axle geometry back to factory settings (SuperPro are recommended due to the ease of fit and long life)

3.Do i need the rear shock relocators?

No you don’t need them but they bring the added benefits of removing extra strain from the lower bushes and also give a little more rear travel