Jimny 1" / 25mm body lift kit
Availability: 22 in stock
Ships today if ordered in the next 5 hours and 47 minutes!
This kit will lift the body of the chassis by 1" or 25mm!
A body lift is very useful for making clearance for fitting larger tyres to your jimny, basically you remove the old nuts holding the body to the chassis, jack the body up so you can get the spacer blocks under the bolts on the body, then bolt back together with the new sleeved bolts in the kit!
This is a fully bolt on kit, so there is no need to do any cutting drilling etc!
The sleeved bolts are clear zinc plated, so you know they won't rust!
The kit includes the following :-
8 nylon spacer blocks
4 zinc plated M10 sleeve bolts
2 zinc plated M12 sleeve bolts
2 Long metric fine bolts for under the headlights
Here are some photos of whats involved in the bodylift. (note they are the old 2" Aluminuim spacers)
Hide Ship Date? | No |
---|