Motul DOT 3 & 4 Synthetic Brake Fluid 500ml

APPLICATIONBRAKE FLUIDS

QUALITY100% SYNTHETIC, SYNTHESE-TECHNOLOGY

PRODUCT RANGECAR, FARMING MACHINES, MOTORCYCLE

PACKAGING,500ML

ARTICLE NUMBER102718

100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems meeting DOT 4 and DOT 3 manufacturers’ recommendations. Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Dry boiling point 245 °C / 473 °F. Wet boiling point 158 °C / 316 °F. Standards: FMVSS 116 DOT 4 & DOT 3; SAE J 1703.

STANDARDS FMVSS 116 DOT 3 / 116 DOT 4
ISO 4925 (3 & 4)
SAE J1703
Very good thermal resistance and stability:

MOTUL DOT 3&4 typical dry boiling point (245°C / 473°F) is superior to conventional fluids DOT 3 (205°C / 401°F mini)
and DOT 4 (230°C / 466°F), and therefore enables effective brake even under extreme conditions.

Security:

MOTUL DOT 3&4 typical wet boiling point (160°C / 320°F) is superior to conventional fluids DOT 3 (140°C / 284°F mini)
and DOT 4 (155°C / 311°F), and therefore enables longer use of the product.
Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduce their boiling
points and consequently security.
The wet boiling point is representative of the fluid after one year of use.
Perfectly neutral with seals used in braking systems. Anti-corrosion.

Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products.
Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM).
Store brake fluid in its original container, tightly closed to avoid absorption of moisture.
Aggressive chemical product if contact with hands, paint or varnish.
In case of skin contact, rinse thoroughly with water.
For safety advice, draining once a year is recommended

Color Visual Yellow
Viscosity at 100°C (212°F) 2.3 mm²/s
Viscosity at -40°C (-40°F) 1,350.0 mm²/s
Dry boiling point 245.0 mm²/s / 473.0 °F
Wet boiling point 160.0 °C / 320.0 °F