Suzuki Jimny 15" Black 5.5" Standard Steel Wheel

Availability: More than 40 in stock

Ships today if ordered in the next 3 hours and 39 minutes!

SKU
Type 17
£48.00 £40.00

Suzuki Jimny 15" Black Steel Wheel – 15x5.5J ET5

A high-quality aftermarket black steel wheel for Suzuki Jimny models. Manufactured in the standard 15x5.5J ET5 specification used on the wider-body Jimny, these are an ideal replacement for damaged, rusty or corroded original wheels.

The simple black steel design gives a clean factory-style appearance while retaining the standard wheel width and offset used on the JB33, JB43 and the JB74 Jimny.

Wheel Specifications

  • Wheel diameter: 15"
  • Wheel width: 5.5J
  • Offset: ET5
  • PCD: 5 x 139.7mm
  • Centre bore: 108.7mm
  • Wheel nut thread: M12 x 1.25
  • Colour: Black
  • Construction: Steel
  • Brand: Aftermarket

Fitment

  • Suzuki Jimny JB33 – 1998 to 2018
  • Suzuki Jimny JB43 – 1998 to 2018
  • Suzuki Jimny JB74 – 2018 onwards
  • Suzuki Jimny JB23 Kei – 1998 to 2018 – see offset information below
  • Suzuki Jimny JB64 Kei – 2018 onwards – see offset information below

Please note: Model years can vary slightly depending on country and market, particularly with imported vehicles. If you are unsure of your Jimny model, please check the chassis code before ordering.

JB23 & JB64 Kei Model Fitment

These wheels can also be used on the narrower JB23 and JB64 Kei Jimny models. However, the standard Kei wheel uses an ET22 offset, whereas these wheels are ET5.

As both wheels are the same 5.5J width, fitting an ET5 wheel in place of an ET22 wheel will position the wheel approximately 17mm further out on each side. This gives approximately 34mm additional overall track width compared with the standard Kei wheel setup.

Standard-Style Replacement

On JB33, JB43 and applicable JB74 models using the standard 15x5.5J ET5 specification, these wheels retain the original-style wheel position rather than creating the much wider stance associated with negative-offset aftermarket wheels.

Ideal For

  • Replacing rusty or damaged original steel wheels
  • Restoring a Jimny while retaining a factory-style appearance
  • Creating a second set of wheels for winter or off-road tyres
  • Replacing or adding a spare wheel
  • JB23 and JB64 Kei owners wanting the wheels to sit approximately 17mm further out per side

What's Included

Supplied as one aftermarket black steel wheel.

Important Information

This is an aftermarket wheel and is not a Genuine Suzuki product. Please check your existing wheel and tyre specification before ordering, particularly on imported or modified vehicles.

More Information
Weight 11.00
Write Your Own Review
You're reviewing:Suzuki Jimny 15" Black 5.5" Standard Steel Wheel
We found other products you might like!