Genuine Suzuki Jimny Front Differential Gear Spacer Drive Bevel Pinion - No 3

Genuine Suzuki Front Differential Gear Spacer / Drive Bevel Pinion Spacer – 27315-80001 / 27315-64P00 (No. 3)

Description:
This is a genuine Suzuki front differential gear spacer used on the Jimny. Also known as the drive bevel pinion spacer, it fits onto the pinion shaft to establish correct component spacing within the front differential assembly. A worn or incorrect spacer can lead to improper pinion positioning, excessive gear noise, or premature bearing wear.

Key Features:

• OEM genuine Suzuki spacer for correct pinion shaft alignment.

• Ensures proper mesh between the pinion and crown wheel gears.

• Precision-machined for accurate differential setup.

• Direct replacement for Suzuki part numbers 27315-80001 and 27315-64P00.

Fitment:

• Suzuki Jimny (1998–2018).

• Position number: 3 in the Suzuki parts diagram.

• Location: Front differential drive bevel pinion assembly.

• OEM part numbers: 27315-80001 / 27315-64P00.

When to Replace:

• During a differential rebuild or gear ratio change.

• If pinion depth or alignment is incorrect.

• When excessive whine or gear noise comes from the front differential.

• If the original spacer shows wear, scoring, or deformation.

What’s Included:

• One genuine Suzuki front differential drive bevel pinion spacer.

Notes:
Spacer selection is critical for correct differential setup. Always verify pinion depth, preload, and gear contact pattern after installation. Use only genuine components to maintain long-term diff reliability.