3" / 75mm Suzuki Jimny Black Raptor Full Suspension Lift Kit - 2019 On

A full 3" / 75mm suspension lift kit for the Gen 4 Suzuki Jimny from 2018 onwards, after many 1000's of miles of testing we have a fully bolt on kit.

This kit allows you to lift your Jimny up 3" giving it a better stance, and better "off road" ability with longer shocks for extra articulation, and contains all the parts needed to give a full 3" lift with no extra parts needed.

With only small amounts of trimming on the front bumper you can fit 30" tyres quite easily 
 
The UK made springs have the complete range of heat treatment processes, hardening, quenching and tempering, are all digitally controlled to ensure the correct hardness is achieved. Full shot peening, pre-setting and load testing ensure a long and fatigue free life.
 
The springs are nice and flexi and not stiff, and RHD drive models have the longer spring to compensate for the "jimny lean", and are slightly uprated to cope with the extra height and extra weight drivers can carry on offroading trips.
 
The kits come with specific LHD and RHD springs.
 
This kit comes with Black Raptor shocks, these gas charged shocks are matched specifically for the Jimny to give the best ride possible. The shocks are not as stiff as other aftermarket shocks such as Pro Comp or Rough Country. The Black Raptor shock absorbers are designed with an integrated dust cover to eliminate the risk of any dust or debris damaging the shock, this also eliminates the need to buy boots/gators to protect your shock absorbers.

A Black Raptor decal pack is also included in the kit free of charge.

 
The kit comes with the following components:-
 
4x +3" / 75mm Coil springs in either LHD or RHD
4x +3" / 75mm Black Raptor shock absorbers
4x HD CDS tubed +3" / 75mm castor corrected radius arms (bushes available as optional extra)
2x HD CDS tubed adjustable panhard rods, with a choice of Superpro bushes or Black Raptor bushes
1x extended braided brake hose set in a choice of 7 colours
4x Extended bump stops with new rubber
1x Anti roll bar / sway bar drop kit
1x High clearance crossmember
1x Cable support bracket kit
2x prop spacers or optional HD propshafts
1x Headlight bracket (Only needed for self adjusting headlights)