Longfield™ Toyota Land Cruiser 80 Series Gun Drilled 24-Spline Super Set

Availability: 2 in stock

SKU
301712-1-KIT
£1,323.83 £1,103.19

We ship worldwide everyday!

EU orders ship Duties and Taxes Paid!

Click Here For More Info

 

The Longfield™ FJ80 Gun Drilled 24-Spline CVs are made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers. The internals of the CV are also made from 4340 chromoly and are dual heat treated for superior strength. The CV has a M8 grease nipple at the end of the stub shaft and is gun drilled through the center of the CV to allow for grease to pass through the nipple fitting and into the internals. This will save you precious time by eliminating the need to disassemble your axle just to service your CVs.

The FJ80 Gun Drilled 24-Spline CVs also have a shallow relief near the splines on the stub shaft known as a Machined Spline Saver. The Machined Spline Saver eliminates stress concentrations caused by grooving from the tool that makes the splines on the stub shaft. The stress concentration from the spline groove is a common failure point on CV stub shafts. The stub shaft of the CV has dual snap ring grooves to accommodate FJ80s with short and long drive flanges.

The axle shafts are also made out of 4340 chromoly

Included in this kit is a set of new FJ80 ABS Tone Rings. This will allow you to install the Longfield™ FJ80 Gun Drilled 24-Spline Super Set on both ABS and Non-ABS FJ80 applications. We also include extended dust caps to allow you to use these CVs on 1990-1993 FJ80 models that use short drive flanges. No other kit on the market can compare.

Note: 1990-1993 models with short drive flanges will need to obtain the taller drive flanges (Toyota P/N 43421-60040) to be able to reuse the OEM grease caps or get a set of our FJ80 Extended Dust Caps.

Specifications:
Made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers
CV housing is made out of forged 4340 chromoly steel
CV stub shaft has dual snap ring grooves to accommodate FJ80s with short and long drive flanges
Internals of our Longfield™ CVs are made out of 4340 chromoly steel and then dual heat-treated for superior strength
Machined spline saver to eliminate stress concentrations from the spline groove
Gun drilled to create grease passage through the CV
M8 grease nipple at the end of stub shaft for easy greasing of the CV
Includes FJ80 ABS Tone Ring
Includes extended drive flange dust caps
The axle shafts are also made out of 4340 chromoly steel

Application Data:
1990-1997 Toyota Land Cruiser FJ80**
1995-1997 Lexus LX 450

More Information
Hide Ship Date? Yes
Write Your Own Review
You're reviewing:Longfield™ Toyota Land Cruiser 80 Series Gun Drilled 24-Spline Super Set