Genuine Suzuki Rear Diff Pinion Bearing ( Small ) - No 22

Genuine Suzuki Rear Differential Pinion Bearing (Small) – 09265-30017 (No. 22)

Description:
This is a genuine Suzuki rear differential pinion bearing (small) used on the pinion shaft inside the rear differential. This is the bearing that sits closest to the propshaft flange, supporting the outer end of the pinion shaft and maintaining correct alignment and preload. A worn or damaged outer pinion bearing can cause differential noise, vibration under load, oil seal failure, and premature gear wear.

Key Features:

• OEM genuine Suzuki small outer pinion taper roller bearing.

• Sits closest to the propshaft flange.

• Ensures correct pinion support, preload, and smooth rotation.

• Manufactured to Suzuki’s exact specifications for durability and reliability.

• Direct replacement for Suzuki part number 09265-30017.

Fitment:

• Suzuki Jimny – all years

  • Fits rear differential only.

• Suzuki SJ / Samurai – all models (except SJ410)

  • Fits rear differential.

• Position number: 22 in the Suzuki parts diagram.

• Location: Rear differential pinion shaft – outer (small) bearing.

• OEM part number: 09265-30017.

When to Replace:

• If whining, rumbling, or grinding noises occur from the rear differential.

• During pinion bearing replacement or full differential rebuilds.

• When excessive pinion play or incorrect preload is detected.

• If oil leaks have damaged the bearing or race.

What’s Included:

• One genuine Suzuki rear differential pinion bearing (small / outer).

Notes:
Always replace both inner and outer pinion bearings together and reset pinion preload to factory specifications. Inspect the bearing race, crush collar, pinion nut, and oil seal during installation to ensure long-term reliability.