Genuine Suzuki Jimny Front Differential Pinion Bearing - No 19

Genuine Suzuki Front Differential Pinion Bearing – 09265-35011F (No. 19)

Description:
This is a genuine Suzuki front differential pinion bearing for the Suzuki Jimny. This taper roller bearing is the one that sits closest to the crown gear, supporting the inner end of the pinion shaft. It ensures correct preload, smooth rotation, and accurate gear mesh between the pinion and crown wheel. A worn or noisy inner pinion bearing can cause front differential whine, vibration under load, or long-term gear damage.

Key Features:

• OEM genuine Suzuki taper roller bearing for the inner pinion position.

• This is the bearing that sits closest to the crown gear.

• Ensures correct preload and stable pinion alignment.

• Prevents diff noise, vibration, and premature gear wear.

• Direct replacement for Suzuki part number 09265-35011F.

Fitment:

• Suzuki Jimny (1995–Onwards).

• Fits the FRONT differential on all Jimnys and SJ / Samurai models
  (Does not fit SJ410 models).

• Position number: 19 in the Suzuki parts diagram.

• Location: Front differential pinion shaft – inner bearing.

• OEM part number: 09265-35011F.

When to Replace:

• If whining or rumbling noise occurs on acceleration or deceleration.

• When excessive pinion movement or incorrect preload is found.

• During differential rebuilds or ring & pinion replacements.

• If metal debris, heat damage, or bearing wear is visible.

What’s Included:

• One genuine Suzuki front inner pinion taper roller bearing.

Notes:
Always replace in conjunction with the outer pinion bearing when possible. Ensure correct preload, shim selection, and gear pattern setup during installation. Using proper gear oil will help maximise bearing and gear life.