Jimny Rear Shock Repositioners / Spacers
Availability: In Stock
SKU
JSR(KIT)
As low as £26.58
Incl. Tax £31.90
These repositioners / spacers fit on the bottom of the rear shock absorbers allowing more movement of the rear shocks
They twist the shock by 90 degrees giving the shock an extra plane of movement, useful when running longer shocks
The extra plane of movement takes all the strain out of the lower bushes because it can move in its new plane
Only takes 10 mins to fit! just unbolt the shock, twist 90 degrees bolt through the U bracket then bolt the bracket onto the axle shock mounting point
These repositioners / spacers give the shocks an extra 1.5" of length
Now available with optional long bolts if needed
These bolts are long enough so you can drill the existing thread out and bolt them together
The benefits are that you can set the amount of movement due to the nylocing nuts
The existing bolts have a habit of coming loose but with these you know they won’t come undone!
You will need a good 12mm drill bit to drill through as the steel is quite tough!
Hide Ship Date? | No |
---|
Write Your Own Review